Low-Carbon Life, Environmental Protection and Fuel Saving

There are hundreds of different compounds in automobile exhaust, among which pollutants are solid suspended particles, carbon monoxide, carbon dioxide, hydrocarbon, etc.

 

Automobile exhaust, one of the main source of PM2.5, not only endangers human health, but has a far-reaching impact on the environment. Besides, sulfur dioxide in the automobile exhaust has irritating smell, and when reaching a certain concentration, it is easy to cause acid rain, which causes acidification of soil and water sources and affects the growth of crops and forests.

 

Except automobile exhaust pollution, there are the problems of insufficient power, high fuel consumption, carbon deposition and so on.

 

Although we regularly maintain the engine and change the engine oil or filter element, some carbon deposition will be inevitably generated in the engine. If there is too much carbon deposit, the engine will shake violently at idle speed, causing wear and tear to the engine for a long time.

 

So according to the above problems, our company has developed this ENERGY GUARD after 4 years of research and development.

 

What are the advantages of ENERGY GUARD?

Four functions of ENERGY GUARD

1. Promote engine power

The combined action of the co-frequency resonance wave and superoxide anion makes the oil molecular group finer, the macromolecular group decomposes into micromolecular groups, activates gasoline, helps the automobile engine burn faster, and the power is obvious improved.

 

2. Remove carbon deposits

Too much carbon deposits will lead to cylinder knock, wear and tear the engine, and also endanger the normal working of piston and crankshaft. Superoxide anion is generated on the surface of the oil through the action of ENERGY GUARD, so that the oxidation-reduction reaction speed during combustion is improved, the combustion efficiency is promoted, the generation of carbon deposition is reduced, and the noise of an engine can be reduced at the same time.

 

3. Decrease oil consumption

The same frequency resonance wave released by the ENERGY GUARD refines the oil molecular mass, increases the superoxide anion on the surface, enhances the atomization effect of the fuel, improves the combustion efficiency, and saves fuel consumption 10%30%. (At the end of this text, there is attached the test experience process of ENERGY GUARD.

 

4. Reduce exhaust emissions

Remove the black smoke, reduce CO₂ and solid particulate emissions, and protect the environment.

TEST REPORT

1. Co- Frequency resonance wave emissivity is 0.91.

2. The resonance wave range is 4-16 microns.

 

ENERGY GUARD Use Methods

It adopts a card-type design, tears off the adhesive and sticks it directly; it does not change car structure, and does not contact with gasoline, and reduces the concerns of consumers.

 

5. The Test Experience Process of ENERGY GUARD

I. Before use

1. Requirements:

A. Before using ENERGY GUARD, please add oil to 70%80%.

B. Do not put it on the car or take it with you.

2. Test oil consumption

A. Road selection: Select a section of highway about 30km (the longer the better);

B. Speed selection: Keep driving at a constant speed between 80-100km/h;

C. Data record: Clear the average fuel consumption, and record the average fuel consumption and average speed of round trip (If condition permitted, please collect data under different states of air condition on and off, and take photos for comparison).

 

II. After use

1. Stick the ENERGY GUARD

Stick it on the inside of tank cover or beside the refueling port, and select the quantity to stick according to its emission;

 

2. Data record:

Repeat the above tests at the same speed on the same road, and record the average fuel consumption and average speed;

 

3. Data comparison

Surprise will come to you when the two groups of data before and after use are compared to obtain the percentage of fuel saving.

A. Fuel -Saving talent —— over 30%

B. Fuel-Saving elite —— 20% 30%

C. Fuel-Saving proficient —— 10%—20%

 

4. Attention

Eliminate differences: Remain the same driver, passenger(s), outer environment conditions (temperature, rain or shine, no traffic jam), states of air condition on and off, similar average speed, and deduct the queue for entering and leaving the toll station.

 

5. The  Comparison Experience Table of ENERGY GUARD